Spring Boot 1.5.7.RELEASE中如何配置属性以实现高效应用开发？

本文共计8478个文字，预计阅读时间需要34分钟。

Spring 配置属性

Spring配置属性

# BANNER banner.charset=UTF-8 # Banner file encoding. banner.location=classpath:banner.txt # Banner file location. banner.image.location=classpath:banner.gif # Banner image file location (jpg/png can also be used). banner.image.width= # Width of the banner image in chars (default 76) banner.image.height= # Height of the banner image in chars (default based on image height) banner.image.margin= # Left hand image margin in chars (default 2) banner.image.invert= # If images should be inverted for dark terminal themes (default false) # LOGGING logging.config= # Location of the logging configuration file. For instance `classpath:logback.xml` for Logback logging.exception-conversion-word=%wEx # Conversion word used when logging exceptions. logging.file= # Log file name. For instance `myapp.log` logging.level.*= # Log levels severity mapping. For instance `logging.level.org.springframework=DEBUG` logging.path= # Location of the log file. For instance `/var/log` logging.pattern.console= # Appender pattern for output to the console. Only supported with the default logback setup. logging.pattern.file= # Appender pattern for output to the file. Only supported with the default logback setup. logging.pattern.level= # Appender pattern for log level (default %5p). Only supported with the default logback setup. logging.register-shutdown-hook=false # Register a shutdown hook for the logging system when it is initialized. # AOP spring.aop.auto=true # Add @EnableAspectJAutoProxy. spring.aop.proxy-target-class=false # Whether subclass-based (CGLIB) proxies are to be created (true) as opposed to standard Java interface-based proxies (false). # IDENTITY (ContextIdApplicationContextInitializer) spring.application.index= # Application index. spring.application.name= # Application name. # ADMIN (SpringApplicationAdminJmxAutoConfiguration) spring.application.admin.enabled=false # Enable admin features for the application. spring.application.admin.jmx-name=org.springframework.boot:type=Admin,name=SpringApplication # JMX name of the application admin MBean. # AUTO-CONFIGURATION spring.autoconfigure.exclude= # Auto-configuration classes to exclude. # SPRING CORE spring.beaninfo.ignore=true # Skip search of BeanInfo classes. # SPRING CACHE (CacheProperties) spring.cache.cache-names= # Commaseparated list of cache names to create if supported by the underlying cache manager. spring.cache.caffeine.spec= # The spec to use to create caches. Check CaffeineSpec for more details on the spec format. spring.cache.couchbase.expiration=0 # Entry expiration in milliseconds. By default the entries never expire. spring.cache.ehcache.config= # The location of the configuration file to use to initialize EhCache. spring.cache.guava.spec= # The spec to use to create caches. Check CacheBuilderSpec for more details on the spec format. spring.cache.infinispan.config= # The location of the configuration file to use to initialize Infinispan. spring.cache.jcache.config= # The location of the configuration file to use to initialize the cache manager. spring.cache.jcache.provider= # Fully qualified name of the CachingProvider implementation to use to retrieve the JSR-107 compliant cache manager. Only needed if more than one JSR-107 implementation is available on the classpath. spring.cache.type= # Cache type, auto-detected according to the environment by default. # SPRING CONFIG - using environment property only (ConfigFileApplicationListener) spring.config.location= # Config file locations. spring.config.name=application # Config file name. # HAZELCAST (HazelcastProperties) spring.hazelcast.config= # The location of the configuration file to use to initialize Hazelcast. # PROJECT INFORMATION (ProjectInfoProperties) spring.info.build.location=classpath:META-INF/build-info.properties # Location of the generated buildinfo.propertiesfile. spring.info.git.location=classpath:git.properties # Location of the generated git.properties file. # JMX spring.jmx.default-domain= # JMX domain name. spring.jmx.enabled=true # Expose management beans to the JMX domain. spring.jmx.server=mbeanServer # MBeanServer bean name. # Email (MailProperties) spring.mail.default-encoding=UTF-8 # Default MimeMessage encoding. spring.mail.host= # SMTP server host. For instance `smtp.example.com` spring.mail.jndi-name= # Session JNDI name. When set, takes precedence to others mail settings. spring.mail.password= # Login password of the SMTP server. spring.mail.port= # SMTP server port. spring.mail.properties.*= # Additional JavaMail session properties. spring.mail.protocol=smtp # Protocol used by the SMTP server. spring.mail.test-connection=false # Test that the mail server is available on startup. spring.mail.username= # Login user of the SMTP server. # APPLICATION SETTINGS (SpringApplication) spring.main.banner-mode=console # Mode used to display the banner when the application runs. spring.main.sources= # Sources (class name, package name or XML resource location) to include in the ApplicationContext. spring.main.web-environment= # Run the application in a web environment (auto-detected by default). # FILE ENCODING (FileEncodingApplicationListener) spring.mandatory-file-encoding= # Expected character encoding the application must use. # INTERNATIONALIZATION (MessageSourceAutoConfiguration) spring.messages.always-use-message-format=false # Set whether to always apply the MessageFormat rules, parsing even messages without arguments. spring.messages.basename=messages # Comma-separated list of basenames, each following the ResourceBundle convention. spring.messages.cache-seconds=-1 # Loaded resource bundle files cache expiration, in seconds. When set to -1, bundles are cached forever. spring.messages.encoding=UTF-8 # Message bundles encoding. spring.messages.fallback-to-system-locale=true # Set whether to fall back to the system Locale if no files for a specific Locale have been found. # OUTPUT spring.output.ansi.enabled=detect # Configure the ANSI output. # PID FILE (ApplicationPidFileWriter) spring.pid.fail-on-write-error= # Fail if ApplicationPidFileWriter is used but it cannot write the PID file. spring.pid.file= # Location of the PID file to write (if ApplicationPidFileWriter is used). # PROFILES spring.profiles.active= # Comma-separated list (or list if using YAML) of active profiles. spring.profiles.include= # Unconditionally activate the specified comma separated profiles (or list of profiles if using YAML). # SENDGRID (SendGridAutoConfiguration) spring.sendgrid.api-key= # SendGrid api key (alternative to username/password). spring.sendgrid.username= # SendGrid account username. spring.sendgrid.password= # SendGrid account password. spring.sendgrid.proxy.host= # SendGrid proxy host. spring.sendgrid.proxy.port= # SendGrid proxy port. # ---------------------------------------- # WEB PROPERTIES # ---------------------------------------- # EMBEDDED SERVER CONFIGURATION (ServerProperties) server.address= # Network address to which the server should bind to. server.compression.enabled=false # If response compression is enabled. server.compression.excluded-user-agents= # List of user-agents to exclude from compression. server.compression.mime-types=text/html,text/xml,text/plain,text/css,text/javascript,application/javascript # Comma-separated list of MIME types that should be compressed. server.compression.min-response-size=2048 # Minimum response size that is required for compression to be performed. server.connection-timeout= # Time in milliseconds that connectors will wait for another HTTP request before closing the connection. When not set, the connector's container-specific default will be used. Use a value of -1 to indicate no (i.e. infinite) timeout. server.context-parameters.*= # Servlet context init parameters. For instance `server.contextparameters.a=alpha` server.context-path= # Context path of the application. server.display-name=application # Display name of the application. server.max-localhost/test # Mongo database URI. Cannot be set with host, port and credentials. spring.data.mongodb.username= # Login user of the mongo server. Cannot be set with uri. # DATA REDIS spring.data.redis.repositories.enabled=true # Enable Redis repositories. # NEO4J (Neo4jProperties) spring.data.neo4j.compiler= # Compiler to use. spring.data.neo4j.embedded.enabled=true # Enable embedded mode if the embedded driver is available. spring.data.neo4j.open-in-view=false # Register OpenSessionInViewInterceptor. Binds a Neo4j Session to the thread for the entire processing of the request. spring.data.neo4j.password= # Login password of the server. spring.data.neo4j.repositories.enabled=true # Enable Neo4j repositories. spring.data.neo4j.uri= # URI used by the driver. Auto-detected by default. spring.data.neo4j.username= # Login user of the server. # DATA REST (RepositoryRestProperties) spring.data.rest.base-path= # Base path to be used by Spring Data REST to expose repository resources. spring.data.rest.default-page-size= # Default size of pages. spring.data.rest.detection-strategy=default # Strategy to use to determine which repositories get exposed. spring.data.rest.enable-enum-translation= # Enable enum value translation via the Spring Data REST default resource bundle. spring.data.rest.limit-param-name= # Name of the URL query string parameter that indicates how many results to return at once. spring.data.rest.max-page-size= # Maximum size of pages. spring.data.rest.page-param-name= # Name of the URL query string parameter that indicates what page to return. spring.data.rest.return-body-on-create= # Return a response body after creating an entity. spring.data.rest.return-body-on-update= # Return a response body after updating an entity. spring.data.rest.sort-param-name= # Name of the URL query string parameter that indicates what direction to sort results. # SOLR (SolrProperties) spring.data.solr.host=127.0.0.1:8983/solr # Solr host. Ignored if "zk-host" is set. spring.data.solr.repositories.enabled=true # Enable Solr repositories. spring.data.solr.zk-host= # ZooKeeper host address in the form HOST:PORT. # DATASOURCE (DataSourceAutoConfiguration & DataSourceProperties) spring.datasource.continue-on-error=false # Do not stop if an error occurs while initializing the database. spring.datasource.data= # Data (DML) script resource references. spring.datasource.data-username= # User of the database to execute DML scripts (if different). spring.datasource.data-password= # Password of the database to execute DML scripts (if different). spring.datasource.dbcp2.*= # Commons DBCP2 specific settings spring.datasource.driver-class-name= # Fully qualified name of the JDBC driver. Auto-detected based on the URL by default. spring.datasource.generate-unique-name=false # Generate a random datasource name. spring.datasource.hikari.*= # Hikari specific settings spring.datasource.initialize=true # Populate the database using 'data.sql'. spring.datasource.jmx-enabled=false # Enable JMX support (if provided by the underlying pool). spring.datasource.jndi-name= # JNDI location of the datasource. Class, url, username & password are ignored when set. spring.datasource.name=testdb # Name of the datasource. spring.datasource.password= # Login password of the database. spring.datasource.platform=all # Platform to use in the schema resource (schema-${platform}.sql). spring.datasource.schema= # Schema (DDL) script resource references. spring.datasource.schema-username= # User of the database to execute DDL scripts (if different). spring.datasource.schema-password= # Password of the database to execute DDL scripts (if different). spring.datasource.separator=; # Statement separator in SQL initialization scripts. spring.datasource.sql-script-encoding= # SQL scripts encoding. spring.datasource.tomcat.*= # Tomcat datasource specific settings spring.datasource.type= # Fully qualified name of the connection pool implementation to use. By default, it is auto-detected from the classpath. spring.datasource.url= # JDBC url of the database. spring.datasource.username= # Login user of the database. spring.datasource.xa.data-source-class-name= # XA datasource fully qualified name. spring.datasource.xa.properties= # Properties to pass to the XA data source. # JEST (Elasticsearch HTTP client) (JestProperties) spring.elasticsearch.jest.connection-timeout=3000 # Connection timeout in milliseconds. spring.elasticsearch.jest.multi-threaded=true # Enable connection requests from multiple execution threads. spring.elasticsearch.jest.password= # Login password. spring.elasticsearch.jest.proxy.host= # Proxy host the HTTP client should use. spring.elasticsearch.jest.proxy.port= # Proxy port the HTTP client should use. spring.elasticsearch.jest.read-timeout=3000 # Read timeout in milliseconds. spring.elasticsearch.jest.uris=localhost:9200 # Comma-separated list of the Elasticsearch instances to use. spring.elasticsearch.jest.username= # Login user. # H2 Web Console (H2ConsoleProperties) spring.h2.console.enabled=false # Enable the console. spring.h2.console.path=/h2-console # Path at which the console will be available. spring.h2.console.settings.trace=false # Enable trace output. spring.h2.console.settings.web-allow-others=false # Enable remote access. # JOOQ (JooqAutoConfiguration) spring.jooq.sql-dialect= # SQLDialect JOOQ used when communicating with the configured datasource. For instance `POSTGRES` # JPA (JpaBaseConfiguration, HibernateJpaAutoConfiguration) spring.data.jpa.repositories.enabled=true # Enable JPA repositories. spring.jpa.database= # Target database to operate on, auto-detected by default. Can be alternatively set using the "databasePlatform" property. spring.jpa.database-platform= # Name of the target database to operate on, auto-detected by default. Can be alternatively set using the "Database" enum. spring.jpa.generate-ddl=false # Initialize the schema on startup. spring.jpa.hibernate.ddl-auto= # DDL mode. This is actually a shortcut for the "hibernate.hbm2ddl.auto" property. Default to "create-drop" when using an embedded database, "none" otherwise. spring.jpa.hibernate.naming.implicit-strategy= # Hibernate 5 implicit naming strategy fully qualified name. spring.jpa.hibernate.naming.physical-strategy= # Hibernate 5 physical naming strategy fully qualified name. spring.jpa.hibernate.naming.strategy= # Hibernate 4 naming strategy fully qualified name. Not supported with Hibernate 5. spring.jpa.hibernate.use-new-id-generator-mappings= # Use Hibernate's newer IdentifierGenerator for AUTO, TABLE and SEQUENCE. spring.jpa.open-in-view=true # Register OpenEntityManagerInViewInterceptor. Binds a JPA EntityManager to the thread for the entire processing of the request. spring.jpa.properties.*= # Additional native properties to set on the JPA provider. spring.jpa.show-sql=false # Enable logging of SQL statements. # JTA (JtaAutoConfiguration) spring.jta.enabled=true # Enable JTA support. spring.jta.log-dir= # Transaction logs directory. spring.jta.transaction-manager-id= # Transaction manager unique identifier. # ATOMIKOS (AtomikosProperties) spring.jta.atomikos.connectionfactory.borrow-connection-timeout=30 # Timeout, in seconds, for borrowing connections from the pool. spring.jta.atomikos.connectionfactory.ignore-session-transacted-flag=true # Whether or not to ignore the transacted flag when creating session. spring.jta.atomikos.connectionfactory.local-transaction-mode=false # Whether or not local transactions are desired. spring.jta.atomikos.connectionfactory.maintenance-interval=60 # The time, in seconds, between runs of the pool's maintenance thread. spring.jta.atomikos.connectionfactory.max-idle-time=60 # The time, in seconds, after which connections are cleaned up from the pool. spring.jta.atomikos.connectionfactory.max-lifetime=0 # The time, in seconds, that a connection can be pooled for before being destroyed. 0 denotes no limit. spring.jta.atomikos.connectionfactory.max-pool-size=1 # The maximum size of the pool. spring.jta.atomikos.connectionfactory.min-pool-size=1 # The minimum size of the pool. spring.jta.atomikos.connectionfactory.reap-timeout=0 # The reap timeout, in seconds, for borrowed connections. 0 denotes no limit. spring.jta.atomikos.connectionfactory.unique-resource-name=jmsConnectionFactory # The unique name used to identify the resource during recovery. spring.jta.atomikos.datasource.borrow-connection-timeout=30 # Timeout, in seconds, for borrowing connections from the pool. spring.jta.atomikos.datasource.default-isolation-level= # Default isolation level of connections provided by the pool. spring.jta.atomikos.datasource.login-timeout= # Timeout, in seconds, for establishing a database connection. spring.jta.atomikos.datasource.maintenance-interval=60 # The time, in seconds, between runs of the pool's maintenance thread. spring.jta.atomikos.datasource.max-idle-time=60 # The time, in seconds, after which connections are cleaned up from the pool. spring.jta.atomikos.datasource.max-lifetime=0 # The time, in seconds, that a connection can be pooled for before being destroyed. 0 denotes no limit. spring.jta.atomikos.datasource.max-pool-size=1 # The maximum size of the pool. spring.jta.atomikos.datasource.min-pool-size=1 # The minimum size of the pool. spring.jta.atomikos.datasource.reap-timeout=0 # The reap timeout, in seconds, for borrowed connections. 0 denotes no limit. spring.jta.atomikos.datasource.test-query= # SQL query or statement used to validate a connection before returning it. spring.jta.atomikos.datasource.unique-resource-name=dataSource # The unique name used to identify the resource during recovery. spring.jta.atomikos.properties.checkpoint-interval=500 # Interval between checkpoints. spring.jta.atomikos.properties.default-jta-timeout=10000 # Default timeout for JTA transactions. spring.jta.atomikos.properties.enable-logging=true # Enable disk logging. spring.jta.atomikos.properties.force-shutdown-on-vm-exit=false # Specify if a VM shutdown should trigger forced shutdown of the transaction core. spring.jta.atomikos.properties.log-base-dir= # Directory in which the log files should be stored. spring.jta.atomikos.properties.log-base-name=tmlog # Transactions log file base name. spring.jta.atomikos.properties.max-actives=50 # Maximum number of active transactions. spring.jta.atomikos.properties.max-timeout=300000 # Maximum timeout (in milliseconds) that can be allowed for transactions. spring.jta.atomikos.properties.serial-jta-transactions=true # Specify if sub-transactions should be joined when possible. spring.jta.atomikos.properties.service= # Transaction manager implementation that should be started. spring.jta.atomikos.properties.threaded-two-phase-commit=false # Use different (and concurrent) threads for two-phase commit on the participating resources. spring.jta.atomikos.properties.transaction-manager-unique-name= # Transaction manager's unique name. # BITRONIX spring.jta.bitronix.connectionfactory.acquire-increment=1 # Number of connections to create when growing the pool. spring.jta.bitronix.connectionfactory.acquisition-interval=1 # Time, in seconds, to wait before trying to acquire a connection again after an invalid connection was acquired. spring.jta.bitronix.connectionfactory.acquisition-timeout=30 # Timeout, in seconds, for acquiring connections from the pool. spring.jta.bitronix.connectionfactory.allow-local-transactions=true # Whether or not the transaction manager should allow mixing XA and non-XA transactions. spring.jta.bitronix.connectionfactory.apply-transaction-timeout=false # Whether or not the transaction timeout should be set on the XAResource when it is enlisted. spring.jta.bitronix.connectionfactory.automatic-enlisting-enabled=true # Whether or not resources should be enlisted and delisted automatically. spring.jta.bitronix.connectionfactory.cache-producers-consumers=true # Whether or not produces and consumers should be cached. spring.jta.bitronix.connectionfactory.defer-connection-release=true # Whether or not the provider can run many transactions on the same connection and supports transaction interleaving. spring.jta.bitronix.connectionfactory.ignore-recovery-failures=false # Whether or not recovery failures should be ignored. spring.jta.bitronix.connectionfactory.max-idle-time=60 # The time, in seconds, after which connections are cleaned up from the pool. spring.jta.bitronix.connectionfactory.max-pool-size=10 # The maximum size of the pool. 0 denotes no limit. spring.jta.bitronix.connectionfactory.min-pool-size=0 # The minimum size of the pool. spring.jta.bitronix.connectionfactory.password= # The password to use to connect to the JMS provider. spring.jta.bitronix.connectionfactory.share-transaction-connections=false # Whether or not connections in the ACCESSIBLE state can be shared within the context of a transaction. spring.jta.bitronix.connectionfactory.test-connections=true # Whether or not connections should be tested when acquired from the pool. spring.jta.bitronix.connectionfactory.two-pc-ordering-position=1 # The position that this resource should take during two-phase commit (always first is Integer.MIN_VALUE, always last is Integer.MAX_VALUE). spring.jta.bitronix.connectionfactory.unique-name=jmsConnectionFactory # The unique name used to identify the resource during recovery. spring.jta.bitronix.connectionfactory.use-tm-join=true # Whether or not TMJOIN should be used when starting XAResources. spring.jta.bitronix.connectionfactory.user= # The user to use to connect to the JMS provider. spring.jta.bitronix.datasource.acquire-increment=1 # Number of connections to create when growing the pool. spring.jta.bitronix.datasource.acquisition-interval=1 # Time, in seconds, to wait before trying to acquire a connection again after an invalid connection was acquired. spring.jta.bitronix.datasource.acquisition-timeout=30 # Timeout, in seconds, for acquiring connections from the pool. spring.jta.bitronix.datasource.allow-local-transactions=true # Whether or not the transaction manager should allow mixing XA and non-XA transactions. spring.jta.bitronix.datasource.apply-transaction-timeout=false # Whether or not the transaction timeout should be set on the XAResource when it is enlisted. spring.jta.bitronix.datasource.automatic-enlisting-enabled=true # Whether or not resources should be enlisted and delisted automatically. spring.jta.bitronix.datasource.cursor-holdability= # The default cursor holdability for connections. spring.jta.bitronix.datasource.defer-connection-release=true # Whether or not the database can run many transactions on the same connection and supports transaction interleaving. spring.jta.bitronix.datasource.enable-jdbc4-connection-test= # Whether or not Connection.isValid() is called when acquiring a connection from the pool. spring.jta.bitronix.datasource.ignore-recovery-failures=false # Whether or not recovery failures should be ignored. spring.jta.bitronix.datasource.isolation-level= # The default isolation level for connections. spring.jta.bitronix.datasource.local-auto-commit= # The default auto-commit mode for local transactions. spring.jta.bitronix.datasource.login-timeout= # Timeout, in seconds, for establishing a database connection. spring.jta.bitronix.datasource.max-idle-time=60 # The time, in seconds, after which connections are cleaned up from the pool. spring.jta.bitronix.datasource.max-pool-size=10 # The maximum size of the pool. 0 denotes no limit. spring.jta.bitronix.datasource.min-pool-size=0 # The minimum size of the pool. spring.jta.bitronix.datasource.prepared-statement-cache-size=0 # The target size of the prepared statement cache. 0 disables the cache. spring.jta.bitronix.datasource.share-transaction-connections=false # Whether or not connections in the ACCESSIBLE state can be shared within the context of a transaction. spring.jta.bitronix.datasource.test-query= # SQL query or statement used to validate a connection before returning it. spring.jta.bitronix.datasource.two-pc-ordering-position=1 # The position that this resource should take during two-phase commit (always first is Integer.MIN_VALUE, always last is Integer.MAX_VALUE). spring.jta.bitronix.datasource.unique-name=dataSource # The unique name used to identify the resource during recovery. spring.jta.bitronix.datasource.use-tm-join=true # Whether or not TMJOIN should be used when starting XAResources. spring.jta.bitronix.properties.allow-multiple-lrc=false # Allow multiple LRC resources to be enlisted into the same transaction. spring.jta.bitronix.properties.asynchronous2-pc=false # Enable asynchronously execution of two phase commit. spring.jta.bitronix.properties.background-recovery-interval-seconds=60 # Interval in seconds at which to run the recovery process in the background. spring.jta.bitronix.properties.current-node-only-recovery=true # Recover only the current node. spring.jta.bitronix.properties.debug-zero-resource-transaction=false # Log the creation and commit call stacks of transactions executed without a single enlisted resource. spring.jta.bitronix.properties.default-transaction-timeout=60 # Default transaction timeout in seconds. spring.jta.bitronix.properties.disable-jmx=false # Enable JMX support. spring.jta.bitronix.properties.exception-analyzer= # Set the fully qualified name of the exception analyzer implementation to use. spring.jta.bitronix.properties.filter-log-status=false # Enable filtering of logs so that only mandatory logs are written. spring.jta.bitronix.properties.force-batching-enabled=true # Set if disk forces are batched. spring.jta.bitronix.properties.forced-write-enabled=true # Set if logs are forced to disk. spring.jta.bitronix.properties.graceful-shutdown-interval=60 # Maximum amount of seconds the TM will wait for transactions to get done before aborting them at shutdown time. spring.jta.bitronix.properties.jndi-transaction-synchronization-registry-name= # JNDI name of the TransactionSynchronizationRegistry. spring.jta.bitronix.properties.jndi-user-transaction-name= # JNDI name of the UserTransaction. spring.jta.bitronix.properties.journal=disk # Name of the journal. Can be 'disk', 'null' or a class name. spring.jta.bitronix.properties.log-part1-filename=btm1.tlog # Name of the first fragment of the journal. spring.jta.bitronix.properties.log-part2-filename=btm2.tlog # Name of the second fragment of the journal. spring.jta.bitronix.properties.max-log-size-in-mb=2 # Maximum size in megabytes of the journal fragments. spring.jta.bitronix.properties.resource-configuration-filename= # ResourceLoader configuration file name. spring.jta.bitronix.properties.server-id= # ASCII ID that must uniquely identify this TM instance. Default to the machine's IP address. spring.jta.bitronix.properties.skip-corrupted-logs=false # Skip corrupted transactions log entries. spring.jta.bitronix.properties.warn-about-zero-resource-transaction=true # Log a warning for transactions executed without a single enlisted resource. # NARAYANA (NarayanaProperties) spring.jta.narayana.default-timeout=60 # Transaction timeout in seconds. spring.jta.narayana.expiryscanners=com.arjuna.ats.internal.arjuna.recovery.ExpiredTransactionStatusManagerScanner # Commaseparated list of expiry scanners. spring.jta.narayana.log-dir= # Transaction object store directory. spring.jta.narayana.one-phase-commit=true # Enable one phase commit optimisation. spring.jta.narayana.periodic-recovery-period=120 # Interval in which periodic recovery scans are performed in seconds. spring.jta.narayana.recovery-backoff-period=10 # Back off period between first and second phases of the recovery scan in seconds. spring.jta.narayana.recovery-db-pass= # Database password to be used by recovery manager. spring.jta.narayana.recovery-db-user= # Database username to be used by recovery manager. spring.jta.narayana.recovery-jms-pass= # JMS password to be used by recovery manager. spring.jta.narayana.recovery-jms-user= # JMS username to be used by recovery manager. spring.jta.narayana.recovery-modules= # Comma-separated list of recovery modules. spring.jta.narayana.transaction-manager-id=1 # Unique transaction manager id. spring.jta.narayana.xa-resource-orphan-filters= # Comma-separated list of orphan filters. # EMBEDDED MONGODB (EmbeddedMongoProperties) spring.mongodb.embedded.features=SYNC_DELAY # Comma-separated list of features to enable. spring.mongodb.embedded.storage.database-dir= # Directory used for data storage. spring.mongodb.embedded.storage.oplog-size= # Maximum size of the oplog in megabytes. spring.mongodb.embedded.storage.repl-set-name= # Name of the replica set. spring.mongodb.embedded.version=2.6.10 # Version of Mongo to use. # REDIS (RedisProperties) spring.redis.cluster.max-redirects= # Maximum number of redirects to follow when executing commands across the cluster. spring.redis.cluster.nodes= # Comma-separated list of "host:port" pairs to bootstrap from. spring.redis.database=0 # Database index used by the connection factory. spring.redis.url= # Connection URL, will override host, port and password (user will be ignored), e.g. redis://user:password@example.com:6379 spring.redis.host=localhost # Redis server host. spring.redis.password= # Login password of the redis server. spring.redis.ssl=false # Enable SSL support. spring.redis.pool.max-active=8 # Max number of connections that can be allocated by the pool at a given time. Use a negative value for no limit. spring.redis.pool.max-idle=8 # Max number of "idle" connections in the pool. Use a negative value to indicate an unlimited number of idle connections. spring.redis.pool.max-wait=-1 # Maximum amount of time (in milliseconds) a connection allocation should block before throwing an exception when the pool is exhausted. Use a negative value to block indefinitely. spring.redis.pool.min-idle=0 # Target for the minimum number of idle connections to maintain in the pool. This setting only has an effect if it is positive. spring.redis.port=6379 # Redis server port. spring.redis.sentinel.master= # Name of Redis server. spring.redis.sentinel.nodes= # Comma-separated list of host:port pairs. spring.redis.timeout=0 # Connection timeout in milliseconds. # TRANSACTION (TransactionProperties) spring.transaction.default-timeout= # Default transaction timeout in seconds. spring.transaction.rollback-on-commit-failure= # Perform the rollback on commit failures. # ---------------------------------------- # INTEGRATION PROPERTIES # ---------------------------------------- # ACTIVEMQ (ActiveMQProperties) spring.activemq.broker-url= # URL of the ActiveMQ broker. Auto-generated by default. spring.activemq.close-timeout=15000 # Time to wait, in milliseconds, before considering a close complete. spring.activemq.in-memory=true # Specify if the default broker URL should be in memory. Ignored if an explicit broker has been specified. spring.activemq.non-blocking-redelivery=false # Do not stop message delivery before re-delivering messages from a rolled back transaction. This implies that message order will not be preserved when this is enabled. spring.activemq.password= # Login password of the broker. spring.activemq.send-timeout=0 # Time to wait, in milliseconds, on Message sends for a response. Set it to 0 to indicate to wait forever. spring.activemq.user= # Login user of the broker. spring.activemq.packages.trust-all= # Trust all packages. spring.activemq.packages.trusted= # Comma-separated list of specific packages to trust (when not trusting all packages). spring.activemq.pool.block-if-full=true # Block when a connection is requested and the pool is full. Set it to false to throw a "JMSException" instead. spring.activemq.pool.block-if-full-timeout=-1 # Blocking period, in milliseconds, before throwing an exception if the pool is still full. spring.activemq.pool.create-connection-on-startup=true # Create a connection on startup. Can be used to warm-up the pool on startup. spring.activemq.pool.enabled=false # Whether a PooledConnectionFactory should be created instead of a regular ConnectionFactory. spring.activemq.pool.expiry-timeout=0 # Connection expiration timeout in milliseconds. spring.activemq.pool.idle-timeout=30000 # Connection idle timeout in milliseconds. spring.activemq.pool.max-connections=1 # Maximum number of pooled connections. spring.activemq.pool.maximum-active-session-per-connection=500 # Maximum number of active sessions per connection. spring.activemq.pool.reconnect-on-exception=true # Reset the connection when a "JMXException" occurs. spring.activemq.pool.time-between-expiration-check=-1 # Time to sleep, in milliseconds, between runs of the idle connection eviction thread. When negative, no idle connection eviction thread runs. spring.activemq.pool.use-anonymous-producers=true # Use only one anonymous "MessageProducer" instance. Set it to false to create one "MessageProducer" every time one is required. # ARTEMIS (ArtemisProperties) spring.artemis.embedded.cluster-password= # Cluster password. Randomly generated on startup by default. spring.artemis.embedded.data-directory= # Journal file directory. Not necessary if persistence is turned off. spring.artemis.embedded.enabled=true # Enable embedded mode if the Artemis server APIs are available. spring.artemis.embedded.persistent=false # Enable persistent store. spring.artemis.embedded.queues= # Comma-separated list of queues to create on startup. spring.artemis.embedded.server-id= # Server id. By default, an auto-incremented counter is used. spring.artemis.embedded.topics= # Comma-separated list of topics to create on startup. spring.artemis.host=localhost # Artemis broker host. spring.artemis.mode= # Artemis deployment mode, auto-detected by default. spring.artemis.password= # Login password of the broker. spring.artemis.port=61616 # Artemis broker port. spring.artemis.user= # Login user of the broker. # SPRING BATCH (BatchProperties) spring.batch.initializer.enabled= # Create the required batch tables on startup if necessary. Enabled automatically if no custom table prefix is set or if a custom schema is configured. spring.batch.job.enabled=true # Execute all Spring Batch jobs in the context on startup. spring.batch.job.names= # Comma-separated list of job names to execute on startup (For instance `job1,job2`). By default, all Jobs found in the context are executed. spring.batch.schema=classpath:org/springframework/batch/core/schema-@@platform@@.sql # Path to the SQL file to use to initialize the database schema. spring.batch.table-prefix= # Table prefix for all the batch meta-data tables. # JMS (JmsProperties) spring.jms.jndi-name= # Connection factory JNDI name. When set, takes precedence to others connection factory auto-configurations. spring.jms.listener.acknowledge-mode= # Acknowledge mode of the container. By default, the listener is transacted with automatic acknowledgment. spring.jms.listener.auto-startup=true # Start the container automatically on startup. spring.jms.listener.concurrency= # Minimum number of concurrent consumers. spring.jms.listener.max-concurrency= # Maximum number of concurrent consumers. spring.jms.pub-sub-domain=false # Specify if the default destination type is topic. spring.jms.template.default-destination= # Default destination to use on send/receive operations that do not have a destination parameter. spring.jms.template.delivery-delay= # Delivery delay to use for send calls in milliseconds. spring.jms.template.delivery-mode= # Delivery mode. Enable QoS when set. spring.jms.template.priority= # Priority of a message when sending. Enable QoS when set. spring.jms.template.qos-enabled= # Enable explicit QoS when sending a message. spring.jms.template.receive-timeout= # Timeout to use for receive calls in milliseconds. spring.jms.template.time-to-live= # Time-to-live of a message when sending in milliseconds. Enable QoS when set. # APACHE KAFKA (KafkaProperties) spring.kafka.bootstrap-servers= # Comma-delimited list of host:port pairs to use for establishing the initial connection to the Kafka cluster. spring.kafka.client-id= # Id to pass to the server when making requests; used for server-side logging. spring.kafka.consumer.auto-commit-interval= # Frequency in milliseconds that the consumer offsets are auto-committed to Kafka if 'enable.auto.commit' true. spring.kafka.consumer.auto-offset-reset= # What to do when there is no initial offset in Kafka or if the current offset does not exist any more on the server. spring.kafka.consumer.bootstrap-servers= # Comma-delimited list of host:port pairs to use for establishing the initial connection to the Kafka cluster. spring.kafka.consumer.client-id= # Id to pass to the server when making requests; used for server-side logging. spring.kafka.consumer.enable-auto-commit= # If true the consumer's offset will be periodically committed in the background. spring.kafka.consumer.fetch-max-wait= # Maximum amount of time in milliseconds the server will block before answering the fetch request if there isn't sufficient data to immediately satisfy the requirement given by "fetch.min.bytes". spring.kafka.consumer.fetch-min-size= # Minimum amount of data the server should return for a fetch request in bytes. spring.kafka.consumer.group-id= # Unique string that identifies the consumer group this consumer belongs to. spring.kafka.consumer.heartbeat-interval= # Expected time in milliseconds between heartbeats to the consumer coordinator. spring.kafka.consumer.key-deserializer= # Deserializer class for keys. spring.kafka.consumer.max-poll-records= # Maximum number of records returned in a single call to poll(). spring.kafka.consumer.value-deserializer= # Deserializer class for values. spring.kafka.listener.ack-count= # Number of records between offset commits when ackMode is "COUNT" or "COUNT_TIME". spring.kafka.listener.ack-mode= # Listener AckMode; see the spring-kafka documentation. spring.kafka.listener.ack-time= # Time in milliseconds between offset commits when ackMode is "TIME" or "COUNT_TIME". spring.kafka.listener.concurrency= # Number of threads to run in the listener containers. spring.kafka.listener.poll-timeout= # Timeout in milliseconds to use when polling the consumer. spring.kafka.producer.acks= # Number of acknowledgments the producer requires the leader to have received before considering a request complete. spring.kafka.producer.batch-size= # Number of records to batch before sending. spring.kafka.producer.bootstrap-servers= # Comma-delimited list of host:port pairs to use for establishing the initial connection to the Kafka cluster. spring.kafka.producer.buffer-memory= # Total bytes of memory the producer can use to buffer records waiting to be sent to the server. spring.kafka.producer.client-id= # Id to pass to the server when making requests; used for server-side logging. spring.kafka.producer.compression-type= # Compression type for all data generated by the producer. spring.kafka.producer.key-serializer= # Serializer class for keys. spring.kafka.producer.retries= # When greater than zero, enables retrying of failed sends. spring.kafka.producer.value-serializer= # Serializer class for values. spring.kafka.properties.*= # Additional properties used to configure the client. spring.kafka.ssl.key-password= # Password of the private key in the key store file. spring.kafka.ssl.keystore-location= # Location of the key store file. spring.kafka.ssl.keystore-password= # Store password for the key store file. spring.kafka.ssl.truststore-location= # Location of the trust store file. spring.kafka.ssl.truststore-password= # Store password for the trust store file. spring.kafka.template.default-topic= # Default topic to which messages will be sent. # RABBIT (RabbitProperties) spring.rabbitmq.addresses= # Comma-separated list of addresses to which the client should connect. spring.rabbitmq.cache.channel.checkout-timeout= # Number of milliseconds to wait to obtain a channel if the cache size has been reached. spring.rabbitmq.cache.channel.size= # Number of channels to retain in the cache. spring.rabbitmq.cache.connection.mode=channel # Connection factory cache mode. spring.rabbitmq.cache.connection.size= # Number of connections to cache. spring.rabbitmq.connection-timeout= # Connection timeout, in milliseconds; zero for infinite. spring.rabbitmq.dynamic=true # Create an AmqpAdmin bean. spring.rabbitmq.host=localhost # RabbitMQ host. spring.rabbitmq.listener.simple.acknowledge-mode= # Acknowledge mode of container. spring.rabbitmq.listener.simple.auto-startup=true # Start the container automatically on startup. spring.rabbitmq.listener.simple.concurrency= # Minimum number of consumers. spring.rabbitmq.listener.simple.default-requeue-rejected= # Whether or not to requeue delivery failures; default `true`. spring.rabbitmq.listener.simple.idle-event-interval= # How often idle container events should be published in milliseconds. spring.rabbitmq.listener.simple.max-concurrency= # Maximum number of consumers. spring.rabbitmq.listener.simple.prefetch= # Number of messages to be handled in a single request. It should be greater than or equal to the transaction size (if used). spring.rabbitmq.listener.simple.retry.enabled=false # Whether or not publishing retries are enabled. spring.rabbitmq.listener.simple.retry.initial-interval=1000 # Interval between the first and second attempt to deliver a message. spring.rabbitmq.listener.simple.retry.max-attempts=3 # Maximum number of attempts to deliver a message. spring.rabbitmq.listener.simple.retry.max-interval=10000 # Maximum interval between attempts. spring.rabbitmq.listener.simple.retry.multiplier=1.0 # A multiplier to apply to the previous delivery retry interval. spring.rabbitmq.listener.simple.retry.stateless=true # Whether or not retry is stateless or stateful. spring.rabbitmq.listener.simple.transaction-size= # Number of messages to be processed in a transaction. For best results it should be less than or equal to the prefetch count. spring.rabbitmq.password= # Login to authenticate against the broker. spring.rabbitmq.port=5672 # RabbitMQ port. spring.rabbitmq.publisher-confirms=false # Enable publisher confirms. spring.rabbitmq.publisher-returns=false # Enable publisher returns. spring.rabbitmq.requested-heartbeat= # Requested heartbeat timeout, in seconds; zero for none. spring.rabbitmq.ssl.enabled=false # Enable SSL support. spring.rabbitmq.ssl.key-store= # Path to the key store that holds the SSL certificate. spring.rabbitmq.ssl.key-store-password= # Password used to access the key store. spring.rabbitmq.ssl.trust-store= # Trust store that holds SSL certificates. spring.rabbitmq.ssl.trust-store-password= # Password used to access the trust store. spring.rabbitmq.ssl.algorithm= # SSL algorithm to use. By default configure by the rabbit client library. spring.rabbitmq.template.mandatory=false # Enable mandatory messages. spring.rabbitmq.template.receive-timeout=0 # Timeout for `receive()` methods. spring.rabbitmq.template.reply-timeout=5000 # Timeout for `sendAndReceive()` methods. spring.rabbitmq.template.retry.enabled=false # Set to true to enable retries in the `RabbitTemplate`. spring.rabbitmq.template.retry.initial-interval=1000 # Interval between the first and second attempt to publish a message. spring.rabbitmq.template.retry.max-attempts=3 # Maximum number of attempts to publish a message. spring.rabbitmq.template.retry.max-interval=10000 # Maximum number of attempts to publish a message. spring.rabbitmq.template.retry.multiplier=1.0 # A multiplier to apply to the previous publishing retry interval. spring.rabbitmq.username= # Login user to authenticate to the broker. spring.rabbitmq.virtual-host= # Virtual host to use when connecting to the broker. # ---------------------------------------- # ACTUATOR PROPERTIES # ---------------------------------------- # ENDPOINTS (AbstractEndpoint subclasses) endpoints.enabled=true # Enable endpoints. endpoints.sensitive= # Default endpoint sensitive setting. endpoints.actuator.enabled=true # Enable the endpoint. endpoints.actuator.path= # Endpoint URL path. endpoints.actuator.sensitive=false # Enable security on the endpoint. endpoints.auditevents.enabled= # Enable the endpoint. endpoints.auditevents.path= # Endpoint path. endpoints.auditevents.sensitive=false # Enable security on the endpoint. endpoints.autoconfig.enabled= # Enable the endpoint. endpoints.autoconfig.id= # Endpoint identifier. endpoints.autoconfig.path= # Endpoint path. endpoints.autoconfig.sensitive= # Mark if the endpoint exposes sensitive information. endpoints.beans.enabled= # Enable the endpoint. endpoints.beans.id= # Endpoint identifier. endpoints.beans.path= # Endpoint path. endpoints.beans.sensitive= # Mark if the endpoint exposes sensitive information. endpoints.configprops.enabled= # Enable the endpoint. endpoints.configprops.id= # Endpoint identifier. endpoints.configprops.keys-to-sanitize=password,secret,key,token,.*credentials.*,vcap_services # Keys that should be sanitized. Keys can be simple strings that the property ends with or regex expressions. endpoints.configprops.path= # Endpoint path. endpoints.configprops.sensitive= # Mark if the endpoint exposes sensitive information. endpoints.docs.curies.enabled=false # Enable the curie generation. endpoints.docs.enabled=true # Enable actuator docs endpoint. endpoints.docs.path=/docs # endpoints.docs.sensitive=false # endpoints.dump.enabled= # Enable the endpoint. endpoints.dump.id= # Endpoint identifier. endpoints.dump.path= # Endpoint path. endpoints.dump.sensitive= # Mark if the endpoint exposes sensitive information. endpoints.env.enabled= # Enable the endpoint. endpoints.env.id= # Endpoint identifier. endpoints.env.keys-to-sanitize=password,secret,key,token,.*credentials.*,vcap_services # Keys that should be sanitized. Keys can be simple strings that the property ends with or regex expressions. endpoints.env.path= # Endpoint path. endpoints.env.sensitive= # Mark if the endpoint exposes sensitive information. endpoints.flyway.enabled= # Enable the endpoint. endpoints.flyway.id= # Endpoint identifier. endpoints.flyway.sensitive= # Mark if the endpoint exposes sensitive information. endpoints.health.enabled= # Enable the endpoint. endpoints.health.id= # Endpoint identifier. endpoints.health.mapping.*= # Mapping of health statuses to HttpStatus codes. By default, registered health statuses map to sensible defaults (i.e. UP maps to 200). endpoints.health.path= # Endpoint path. endpoints.health.sensitive= # Mark if the endpoint exposes sensitive information. endpoints.health.time-to-live=1000 # Time to live for cached result, in milliseconds. endpoints.heapdump.enabled= # Enable the endpoint. endpoints.heapdump.path= # Endpoint path. endpoints.heapdump.sensitive= # Mark if the endpoint exposes sensitive information. endpoints.hypermedia.enabled=false # Enable hypermedia support for endpoints. endpoints.info.enabled= # Enable the endpoint. endpoints.info.id= # Endpoint identifier. endpoints.info.path= # Endpoint path. endpoints.info.sensitive= # Mark if the endpoint exposes sensitive information. endpoints.jolokia.enabled=true # Enable Jolokia endpoint. endpoints.jolokia.path=/jolokia # Endpoint URL path. endpoints.jolokia.sensitive=true # Enable security on the endpoint. endpoints.liquibase.enabled= # Enable the endpoint. endpoints.liquibase.id= # Endpoint identifier. endpoints.liquibase.sensitive= # Mark if the endpoint exposes sensitive information. endpoints.logfile.enabled=true # Enable the endpoint. endpoints.logfile.external-file= # External Logfile to be accessed. endpoints.logfile.path=/logfile # Endpoint URL path. endpoints.logfile.sensitive=true # Enable security on the endpoint. endpoints.loggers.enabled=true # Enable the endpoint. endpoints.loggers.id= # Endpoint identifier. endpoints.loggers.path=/logfile # Endpoint path. endpoints.loggers.sensitive=true # Mark if the endpoint exposes sensitive information. endpoints.mappings.enabled= # Enable the endpoint. endpoints.mappings.id= # Endpoint identifier. endpoints.mappings.path= # Endpoint path. endpoints.mappings.sensitive= # Mark if the endpoint exposes sensitive information. endpoints.metrics.enabled= # Enable the endpoint. endpoints.metrics.filter.enabled=true # Enable the metrics servlet filter. endpoints.metrics.filter.gauge-submissions=merged # Http filter gauge submissions (merged, per-httpmethod) endpoints.metrics.filter.counter-submissions=merged # Http filter counter submissions (merged, per-httpmethod) endpoints.metrics.id= # Endpoint identifier. endpoints.metrics.path= # Endpoint path. endpoints.metrics.sensitive= # Mark if the endpoint exposes sensitive information. endpoints.shutdown.enabled= # Enable the endpoint. endpoints.shutdown.id= # Endpoint identifier. endpoints.shutdown.path= # Endpoint path. endpoints.shutdown.sensitive= # Mark if the endpoint exposes sensitive information. endpoints.trace.enabled= # Enable the endpoint. endpoints.trace.filter.enabled=true # Enable the trace servlet filter. endpoints.trace.id= # Endpoint identifier. endpoints.trace.path= # Endpoint path. endpoints.trace.sensitive= # Mark if the endpoint exposes sensitive information. # ENDPOINTS CORS CONFIGURATION (EndpointCorsProperties) endpoints.cors.allow-credentials= # Set whether credentials are supported. When not set, credentials are not supported. endpoints.cors.allowed-headers= # Comma-separated list of headers to allow in a request. '*' allows all headers. endpoints.cors.allowed-methods=GET # Comma-separated list of methods to allow. '*' allows all methods. endpoints.cors.allowed-origins= # Comma-separated list of origins to allow. '*' allows all origins. When not set, CORS support is disabled. endpoints.cors.exposed-headers= # Comma-separated list of headers to include in a response. endpoints.cors.max-age=1800 # How long, in seconds, the response from a pre-flight request can be cached by clients. # JMX ENDPOINT (EndpointMBeanExportProperties) endpoints.jmx.domain= # JMX domain name. Initialized with the value of 'spring.jmx.default-domain' if set. endpoints.jmx.enabled=true # Enable JMX export of all endpoints. endpoints.jmx.static-names= # Additional static properties to append to all ObjectNames of MBeans representing Endpoints. endpoints.jmx.unique-names=false # Ensure that ObjectNames are modified in case of conflict. # JOLOKIA (JolokiaProperties) jolokia.config.*= # See Jolokia manual # MANAGEMENT HTTP SERVER (ManagementServerProperties) management.add-application-context-header=true # Add the "X-Application-Context" HTTP header in each response. management.address= # Network address that the management endpoints should bind to. management.context-path= # Management endpoint context-path. For instance `/actuator` management.cloudfoundry.enabled= # Enable extended Cloud Foundry actuator endpoints management.cloudfoundry.skip-ssl-validation= # Skip SSL verification for Cloud Foundry actuator endpoint security calls management.port= # Management endpoint HTTP port. Uses the same port as the application by default. Configure a different port to use management-specific SSL. management.security.enabled=true # Enable security. management.security.roles=ACTUATOR # Comma-separated list of roles that can access the management endpoint. management.security.sessions=stateless # Session creating policy to use (always, never, if_required, stateless). management.ssl.ciphers= # Supported SSL ciphers. Requires a custom management.port. management.ssl.client-auth= # Whether client authentication is wanted ("want") or needed ("need"). Requires a trust store. Requires a custom management.port. management.ssl.enabled= # Enable SSL support. Requires a custom management.port. management.ssl.enabled-protocols= # Enabled SSL protocols. Requires a custom management.port. management.ssl.key-alias= # Alias that identifies the key in the key store. Requires a custom management.port. management.ssl.key-password= # Password used to access the key in the key store. Requires a custom management.port. management.ssl.key-store= # Path to the key store that holds the SSL certificate (typically a jks file). Requires a custom management.port. management.ssl.key-store-password= # Password used to access the key store. Requires a custom management.port. management.ssl.key-store-provider= # Provider for the key store. Requires a custom management.port. management.ssl.key-store-type= # Type of the key store. Requires a custom management.port. management.ssl.protocol=TLS # SSL protocol to use. Requires a custom management.port. management.ssl.trust-store= # Trust store that holds SSL certificates. Requires a custom management.port. management.ssl.trust-store-password= # Password used to access the trust store. Requires a custom management.port. management.ssl.trust-store-provider= # Provider for the trust store. Requires a custom management.port. management.ssl.trust-store-type= # Type of the trust store. Requires a custom management.port. # HEALTH INDICATORS management.health.db.enabled=true # Enable database health check. management.health.cassandra.enabled=true # Enable cassandra health check. management.health.couchbase.enabled=true # Enable couchbase health check. management.health.defaults.enabled=true # Enable default health indicators. management.health.diskspace.enabled=true # Enable disk space health check. management.health.diskspace.path= # Path used to compute the available disk space. management.health.diskspace.threshold=0 # Minimum disk space that should be available, in bytes. management.health.elasticsearch.enabled=true # Enable elasticsearch health check. management.health.elasticsearch.indices= # Comma-separated index names. management.health.elasticsearch.response-timeout=100 # The time, in milliseconds, to wait for a response from the cluster. management.health.jms.enabled=true # Enable JMS health check. management.health.ldap.enabled=true # Enable LDAP health check. management.health.mail.enabled=true # Enable Mail health check. management.health.mongo.enabled=true # Enable MongoDB health check. management.health.rabbit.enabled=true # Enable RabbitMQ health check. management.health.redis.enabled=true # Enable Redis health check. management.health.solr.enabled=true # Enable Solr health check. management.health.status.order=DOWN, OUT_OF_SERVICE, UP, UNKNOWN # Comma-separated list of health statuses in order of severity. # INFO CONTRIBUTORS (InfoContributorProperties) management.info.build.enabled=true # Enable build info. management.info.defaults.enabled=true # Enable default info contributors. management.info.env.enabled=true # Enable environment info. management.info.git.enabled=true # Enable git info. management.info.git.mode=simple # Mode to use to expose git information. # REMOTE SHELL (ShellProperties) management.shell.auth.type=simple # Authentication type. Auto-detected according to the environment. management.shell.auth.jaas.domain=my-domain # JAAS domain. management.shell.auth.key.path= # Path to the authentication key. This should point to a valid ".pem" file. management.shell.auth.simple.user.name=user # Login user. management.shell.auth.simple.user.password= # Login password. management.shell.auth.spring.roles=ACTUATOR # Comma-separated list of required roles to login to the CRaSH console. management.shell.command-path-patterns=classpath*:/commands/**,classpath*:/crash/commands/** # Patterns to use to look for commands. management.shell.command-refresh-interval=-1 # Scan for changes and update the command if necessary (in seconds). management.shell.config-path-patterns=classpath*:/crash/* # Patterns to use to look for configurations. management.shell.disabled-commands=jpa*,jdbc*,jndi* # Comma-separated list of commands to disable. management.shell.disabled-plugins= # Comma-separated list of plugins to disable. Certain plugins are disabled by default based on the environment. management.shell.ssh.auth-timeout = # Number of milliseconds after user will be prompted to login again. management.shell.ssh.enabled=true # Enable CRaSH SSH support. management.shell.ssh.idle-timeout = # Number of milliseconds after which unused connections are closed. management.shell.ssh.key-path= # Path to the SSH server key. management.shell.ssh.port=2000 # SSH port. management.shell.telnet.enabled=false # Enable CRaSH telnet support. Enabled by default if the TelnetPlugin is available. management.shell.telnet.port=5000 # Telnet port. # TRACING (TraceProperties) management.trace.include=request-headers,response-headers,cookies,errors # Items to be included in the trace. # METRICS EXPORT (MetricExportProperties) spring.metrics.export.aggregate.key-pattern= # Pattern that tells the aggregator what to do with the keys from the source repository. spring.metrics.export.aggregate.prefix= # Prefix for global repository if active. spring.metrics.export.delay-millis=5000 # Delay in milliseconds between export ticks. Metrics are exported to external sources on a schedule with this delay. spring.metrics.export.enabled=true # Flag to enable metric export (assuming a MetricWriter is available). spring.metrics.export.excludes= # List of patterns for metric names to exclude. Applied after the includes. spring.metrics.export.includes= # List of patterns for metric names to include. spring.metrics.export.redis.key=keys.spring.metrics # Key for redis repository export (if active). spring.metrics.export.redis.prefix=spring.metrics # Prefix for redis repository if active. spring.metrics.export.send-latest= # Flag to switch off any available optimizations based on not exporting unchanged metric values. spring.metrics.export.statsd.host= # Host of a statsd server to receive exported metrics. spring.metrics.export.statsd.port=8125 # Port of a statsd server to receive exported metrics. spring.metrics.export.statsd.prefix= # Prefix for statsd exported metrics. spring.metrics.export.triggers.*= # Specific trigger properties per MetricWriter bean name. # ---------------------------------------- # DEVTOOLS PROPERTIES # ---------------------------------------- # DEVTOOLS (DevToolsProperties) spring.devtools.livereload.enabled=true # Enable a livereload.com compatible server. spring.devtools.livereload.port=35729 # Server port. spring.devtools.restart.additional-exclude= # Additional patterns that should be excluded from triggering a full restart. spring.devtools.restart.additional-paths= # Additional paths to watch for changes. spring.devtools.restart.enabled=true # Enable automatic restart. spring.devtools.restart.exclude=META-INF/maven/**,META-INF/resources/**,resources/**,static/**,public/**,templates/**,**/*Test.class,**/*Tests.class,git.properties # Patterns that should be excluded from triggering a full restart. spring.devtools.restart.poll-interval=1000 # Amount of time (in milliseconds) to wait between polling for classpath changes. spring.devtools.restart.quiet-period=400 # Amount of quiet time (in milliseconds) required without any classpath changes before a restart is triggered. spring.devtools.restart.trigger-file= # Name of a specific file that when changed will trigger the restart check. If not specified any classpath file change will trigger the restart. # REMOTE DEVTOOLS (RemoteDevToolsProperties) spring.devtools.remote.context-path=/.~~spring-boot!~ # Context path used to handle the remote connection. spring.devtools.remote.debug.enabled=true # Enable remote debug support. spring.devtools.remote.debug.local-port=8000 # Local remote debug server port. spring.devtools.remote.proxy.host= # The host of the proxy to use to connect to the remote application. spring.devtools.remote.proxy.port= # The port of the proxy to use to connect to the remote application. spring.devtools.remote.restart.enabled=true # Enable remote restart. spring.devtools.remote.secret= # A shared secret required to establish a connection (required to enable remote support). spring.devtools.remote.secret-header-name=X-AUTH-TOKEN # HTTP header used to transfer the shared secret. # ---------------------------------------- # TESTING PROPERTIES # ---------------------------------------- spring.test.database.replace=any # Type of existing DataSource to replace. spring.test.mockmvc.print=default # MVC Print option.